CompresSeal
Increased sealing and productivity performance at filling lines.
CompresSeal - micro-embossing of PE or PP sealing layer allows to significantly increase sealing and productivity performance at filling lines.
Advantages
- Reduced packaging weight at same packaging thickness
- Improved productivity due to better sealability
- Differentiation via 3D effect of inks
- Higher puncture resistance
- Excellent packaging tightness
- Constant coefficient-of-friction under all climate/storage conditions
- Shorter sealing time = higher sealing speed
- Energy saving in sealing process
- The CompresSeal-Technology can be applied in all packaging laminates, where blown PE films or cast PP films as sealants are used
- Especially for packaging formats with overlapping seals like: Vertical and horizontal FFS, Stand-up pouches, Quadro bags
- Special, patented embossing pattern, which is applied to the sealant film surface towards the package inside
- Embossing pattern reduces the coefficient of friction (COF) also of sticky sealants, like mLLDPE films even without the need to add migrating slip agents like Erucaamide (ESA)
- Films can be laminated both adhesive and by extrusion lamination
- For anti-counterfeiting, also the brand owner’s logo could be embossed on the package inside
Tech Specs
CompresSeal sealants can be combined with all known barrier or printable webs to laminates like:
PET/PE or PET/Alu/PE, OPE/PE (EcoLam), BOPP/CPP
Technologies in use
Film Technology
Film based production technology
Product Safety
Brand protection to avoid counterfeiting.
Easy Open & Reclose
Consumer convenience – easy and intuitive opening & resealing.
High-end Graphics
Make your product stand out from the crowd.
FAQ
It is a hot embossing process after the usual film manufacturing process.
Hot embossing is a widely used technology e.g. for the volume production of baby diaper films, release liner films for the rubber and SMC-industry, office films and many other polyolefinic films of PE and/or PP.
No, except not using critical migration slip additives, the same and proven polymer grades for a given application can be used.
Embossed sealing films are appr. 30% less heavy per m² at the same measured thickness. Thus the compressability and tightness of overlapping seals is improved.
Further Products
